Should an individual Safety capacitor develop an internal short, the resulting fault current blows the fuse, thus isolating the failed Safety capacitor from the remaining devices.
| FactSnippet No. 1,469,760 |
10 Facts About Safety capacitor
2.
Breakdown voltage can be increased by using one-sided partially metallized films, or the breakdown voltage of the Safety capacitor can be increased by using double-sided metallized films.
| FactSnippet No. 1,469,761 |
3.
MP Safety capacitor, single-sided metallized paper, windings impregnated with insulating oil.
| FactSnippet No. 1,469,762 |
4.
The offered film Safety capacitor, Kapton CapacitorCL11, announced from "dhgate" is a "Type: Polypropylene Film Capacitor".
| FactSnippet No. 1,469,763 |
5.
The actual capacitance value of a Safety capacitor should be within the tolerance limits, or the Safety capacitor is out of specification.
| FactSnippet No. 1,469,764 |
Related searches
Polypropylene6.
An AC voltage will cause an AC current, with cyclic charging and discharging of the Safety capacitor causing oscillating motion of the electric dipoles in the dielectric.
| FactSnippet No. 1,469,765 |
7.
Dielectric absorption is the name given to the effect by which a Safety capacitor that has been charged for a long time discharges only incompletely when briefly discharged.
| FactSnippet No. 1,469,766 |
8.
Suppression Safety capacitor is an effective interference reduction component because its electrical impedance decreases with increasing frequency, so that at higher frequencies they short circuit electrical noise and transients between the lines, or to ground.
| FactSnippet No. 1,469,767 |
9.
In more expensive ballasts, a film Safety capacitor is often paired with the inductor to correct the power factor.
| FactSnippet No. 1,469,768 |
10.
The Safety capacitor absorbs the inductive turn-off peak current temporarily, so that the resulting voltage spike is limited.
| FactSnippet No. 1,469,769 |